House or another residence usually is to be one of our dreams for us. Besides the factor of comfort and environment, the house is a reflection of the owner’s characteristics. As the saying ‘there is no place like home’, so people tend to give more accessories to improve their comfort. One of the popular things to add is the heating system. There are some benefits of installing underfloor heating. However, as the owner, you need to pay attention to underfloor heating manifold instructions, even the component. Although, the installation may be the work of the professional installers. 

Things You Should Do In Underfloor Heating Installation

In every installation, indeed, we don’t want to waste time and expense just for the unsuccessful installation. Since the system can only be built once. Mistakes or unprocedural steps will only bring more money to spend. Follow the underfloor heating manifold instructions procedurally. 

Things To Prepare

One of the things you should consider well is related to the source of the heat. There are two types in terms of heating sources. Commonly, they are a heating distributor with a pump or leaving the pump. However, the type chosen is adjusted to the wideness of the area. Here is our recommendation for you. 

For seven or more groups, you are better to use a pump. More groups mean more pumps you need. For a smaller system, just use a regular boiler. It has a good capacity to bring the flow of water into the system.

Decide Whether You Need A Room Control Or Not 

Use a different room for controlling the system for at least 30 percent or 40 percent underfloor system. It is recommended for you to design first as you decide to bring underfloor heating into your house. You can also choose the wireless control to help you better manage the system. 

Using The Border Zone

It is recommended to use such a border zone if your house has more glass compartments. Cold traps, however, are not good for the underfloor heating system. It also affects warmth and comfort. Use 10 mm in installing the system from the center of the system toward the center of the border.

Considering The Position Of The Heating Manifold

The characteristic of the place you should choose is easy to access, neat, and near the central heating pipes. It is better to place the manifold under the stairs. You can also put it in your storage room or on the fit wall. Other places may be acceptable as long as the temperature is well distributed.

Calculation Of The Heat

Good design helps you decide the heat loss calculation. However, it is not cheap work. A good calculation will help you know the temperature you need in your room. In the end, this also brings you to an efficient cable and power used. Besides, it is good to maintain the expense; in the long term, you help to save the environment. 

Things You Need To Avoid In Underfloor Heating Installation

In the progress of the installation, you need to avoid these things. Besides pursuing the underfloor heating manifold instructions, here is the list of things you must leave in the underfloor heating installation. 

1. Avoid The Floor Cooling

Set to 18 degrees above the dew level in supply pipes. While in return lines, set the temperature to 22 degrees. Never set the temperature of the water below the dew point, or your system will get worse. 

2. Never Drill The Underfloor Heating

It will be a great risk if you try to drill. Think twice about what happened as the risk after put or taking anything from the floor. 

3. Set The Temperature Over 29 Degrees

Try to set the temperature to no more than 29 degrees. The too warm temperature will make you uncomfortable.

4. Pipe’s Choice 

Choose only pipes that are watertight type. This pipe is great for long-term use. This type of pipe is more corrosion-resistant.

5. Leaving The Expansion Joint

Always use an expansion joint. This connection will help you avoid cracks. Although it makes the view to be less aesthetic, it is better at preventing you from worse cracks. 

In choosing the type of underfloor heating, here are some factors you need to consider. They are the temperature distribution, the efficiency of energy flows, and the layout of the interior design. As you are installed the system, you will get a healthy temperature, so it will increase your comfort. More tips on underfloor heating manifold instructions will help you to do or leave such things. Underfloor heating also saves you more energy, and you can save more money. 

Now, how about you? Do you have a stunning experience with the use of underfloor heating?